![]() |
|||||||||||||||||||||||||||||||||
| DIATEC CASES | |||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||
| DIATEC | |||||||||||||
![]() |
![]() |
![]() |
![]() |
![]() |
|||||||||
Part No.
DIATEC S Off-White |
Part No.
DIATEC S Lava Grey |
Part No. DIATEC M Off-White |
Part No. DIATEC M Lava Grey |
Description |
W |
L |
H |
Drawings |
|||||
DIATEC S
|
210 |
200 |
48 |
|
|||||||||
DIATEC M |
270 |
200 |
48 |
||||||||||
| HINGED LIDS | ||||||||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
||||||
| For Case | Part No. Hinged Lid S Solid ABS |
Part No. Hinged Lid S Translucent Polycarbonate |
Part No. Hinged Lid S Transparent Polycarbonate |
Part No. Hinged Lid M Solid ABS |
Part No. Hinged Lid M Translucent Polycarbonate |
Part No. Hinged Lid M Transparent Polycarbonate |
||||||
| Off-White | ||||||||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|||||||
Part No. Hinged Lid S Solid ABS |
Part No. Hinged Lid S Translucent Polycarbonate |
Part No. Hinged Lid S Transparent Polycarbonate |
Part No. Hinged Lid M Solid ABS |
Part No. Hinged Lid M Translucent Polycarbonate |
Part No. Hinged Lid M Transparent Polycarbonate |
|||||||
| Lava Grey | ||||||||||||
| Notes: * Drill two Ø4 mm holes in the top panel to fit the hinged lids. Pilot holes on the underside of the top panel make this very easy. |
||||||||||||
| ACCESSORIES | ||||||||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
||||||
| For.. | Part No. Internal Slot-in Panel* |
Part No. Battery Contacts 2 x 1.5V AA |
Part No. 9V Battery Lead |
Part No. Non-slip Feet (1 Pair) |
Part No. PCB Screw Ø3 x 6 mm* (1 Piece) |
Part No. PCB Screw Ø3 x 6 mm* (1 Piece) |
||||||
| All Models | ||||||||||||
| Notes: * Internal Slot-in Panel - This allows the electronics section to be separated from the battery compartment, terminal and wall mounting area. Thus, the device can be installed by the engineer without opening the electronics section. * Self-tapping 'Plastite' screws - for mounting PCBs and components to the internal screw pillars * Select the screw length to suit the thickness of the PCB/component being fitted |
||||||||||||
Tel: (01489) 583858 Last Updated:
13-Jun-2008
©OKW Enclosures Ltd. UK. All rights reserved. |
||||