Advanced Search Part-No.
Login / Registration Your location/language U.K., English

Interface-Terminal

Your selection is shown below.

Installation

Minimum components
1 bottom part, vers. I.
1 front design (cover).
1 bottom panel.
1 installation assembly kit.

or

1 bottom part, vers. II.
1 front design (front panel ABS or glass panel).
1 bottom panel.
1 installation assembly kit.


AltText

B4042707

Bottom part S flat, version I Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting cover or aluminium front panel (sep. article)

Supply 1 bottom part flat

Close

B4042707

Bottom part S flat, version I
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
190x135x24.5mm
IP 54 opt.
AltText

B4042717

Bottom part S flat, version II Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part flat

Close

B4042717

Bottom part S flat, version II
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
190x135x24.5mm
IP 54 opt.
AltText

B4042757

Bottom part S high, version I Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting cover or aluminium front panel (sep. article)

Supply 1 bottom part high

Close

B4042757

Bottom part S high, version I
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
190x135x34.5mm
IP 54 opt.
AltText

B4042767

Bottom part S high, version II Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part high

Close

B4042767

Bottom part S high, version II
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
190x135x34.5mm
IP 54 opt.
AltText

B4044707

Bottom part M flat, version I Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting cover or aluminium front panel (sep. article)

Supply 1 bottom part flat

Close

B4044707

Bottom part M flat, version I
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
225x165x25.5mm
IP 54 opt.
AltText

B4044717

Bottom part M flat, version II Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part flat

Close

B4044717

Bottom part M flat, version II
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
225x165x25.5mm
IP 54 opt.
AltText

B4044757

Bottom part M high, version I Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting cover or aluminium front panel (sep. article)

Supply 1 bottom part high

Close

B4044757

Bottom part M high, version I
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
225x165x35.5mm
IP 54 opt.
AltText

B4044767

Bottom part M high, version II Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part high

Close

B4044767

Bottom part M high, version II
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
225x165x35.5mm
IP 54 opt.
AltText

B4046707

Bottom part L flat, version I Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting cover or aluminium front panel (sep. article)

Supply 1 bottom part flat

Close

B4046707

Bottom part L flat, version I
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
275x195x26.5mm
IP 54 opt.
AltText

B4046717

Bottom part L flat, version II Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part flat

Close

B4046717

Bottom part L flat, version II
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
275x195x26.5mm
IP 54 opt.
AltText

B4046757

Bottom part L high, version I Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting cover or aluminium front panel (sep. article)

Supply 1 bottom part high

Close

B4046757

Bottom part L high, version I
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
275x195x36.5mm
IP 54 opt.
AltText

B4046767

Bottom part L high, version II Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part high

Close

B4046767

Bottom part L high, version II
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
275x195x36.5mm
IP 54 opt.

System components to complete

AltText

B4042407

Cover S Assembly unit: suitable for bottom part vers. I. For protecting the electronics. Integrated screw pillars for PCB fixing. Recessed operating area for protecting the membrane keyboard. Fixing from the rear.

Supply 1 cover, assembly kit

Close

B4042407

Cover S
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
190x135x14mm
AltText

B4044407

Cover M Assembly unit: suitable for bottom part vers. I. For protecting the electronics. Integrated screw pillars for PCB fixing. Recessed operating area for protecting the membrane keyboard. Fixing from the rear.

Supply 1 cover, assembly kit

Close

B4044407

Cover M
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
225x165x14mm
AltText

B4046407

Cover L Assembly unit: suitable for bottom part vers. I. For protecting the electronics. Integrated screw pillars for PCB fixing. Recessed operating area for protecting the membrane keyboard. Fixing from the rear.

Supply 1 cover, assembly kit

Close

B4046407

Cover L
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
275x195x25.5mm
AltText

B4046427

Cover L, for iPad Air With preparation and fixing material for installing an iPad Air. This module is suitable for Type I bottom parts. Protection class with iPad installed max. IP40. We can also offer the option of installing other smaller tablets in our enclosures in this way.

Supply 1 top part, 2 attachment strips, 2 assembly kits (iPad is not included)

Close

B4046427

Cover L, for iPad Air
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
275x195x25.5mm
AltText

B4142106

Front panel S Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Close

B4142106

Front panel S
product added to your list
Aluminium
matt anodised
186.5x131.5x2mm
AltText

B4142107

Front panel S Assembly unit: suitable for bottom part vers. II. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Close

B4142107

Front panel S
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
190.6x135.6x14.5mm
AltText

B4142203

Glass panel S Assembly unit: suitable for bottom part vers. II. Front design without printing. Various media and environmental parameters affect the adhesion of the adhesive foil. Please check before use if it is suitable for your application.

Version Safety glass with anti-reflex coating, high scratch-resistance, very easy to clean

Supply 1 glass panel incl. mounting frame and adhesive foil

Close

B4142203

Glass panel S
product added to your list
Glass
clear
190.6x135.6x16.7mm
AltText

B4142257

Bottom panel with snap-in strips S Assembly unit: suitable for bottom part vers. I and II, screw fixing.

Supply 1 bottom panel, 2 snap-in strips, assembly kit

Close

B4142257

Bottom panel with snap-in strips S
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
AltText

B4142587

Installation assembly kit S, flat For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.

Version Holders matches bottom part, flat

Supply 4 holders, assembly kit, design frame

Close

B4142587

Installation assembly kit S, flat
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
234x185mm
AltText

B4142597

Installation assembly kit S, high For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.

Version Holders matches bottom part, high

Supply 4 holders, assembly kit, design frame

Close

B4142597

Installation assembly kit S, high
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
234x185mm
AltText

B4144106

Front panel M Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Close

B4144106

Front panel M
product added to your list
Aluminium
matt anodised
221.5x161.5x2mm
AltText

B4144107

Front panel M Assembly unit: suitable for bottom part vers. II. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Close

B4144107

Front panel M
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
225.6x165.6x15.5mm
AltText

B4144203

Glass panel M Assembly unit: suitable for bottom part vers. II. Front design without printing. Various media and environmental parameters affect the adhesion of the adhesive foil. Please check before use if it is suitable for your application.

Version Safety glass with anti-reflex coating, high scratch-resistance, very easy to clean

Supply 1 glass panel incl. mounting frame and adhesive foil

Close

B4144203

Glass panel M
product added to your list
Glass
clear
225.6x165.6x17.7mm
AltText

B4144257

Bottom panel with snap-in strips M Assembly unit: suitable for bottom part vers. I and II, screw fixing.

Supply 1 bottom panel, 2 snap-in strips, assembly kit

Close

B4144257

Bottom panel with snap-in strips M
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
AltText

B4144587

Installation assembly kit M, flat For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.

Version Holders matches bottom part, flat

Supply 4 holders, assembly kit, design frame

Close

B4144587

Installation assembly kit M, flat
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
272x218mm
AltText

B4144597

Installation assembly kit M, high For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.

Version Holders matches bottom part, high

Supply 4 holders, assembly kit, design frame

Close

B4144597

Installation assembly kit M, high
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
272x218mm
AltText

B4146106

Front panel L Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Close

B4146106

Front panel L
product added to your list
Aluminium
matt anodised
271.5x191.5x2mm
AltText

B4146107

Front panel L Assembly unit: suitable for bottom part vers. II. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Close

B4146107

Front panel L
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
275.6x195.6x15.5mm
AltText

B4146126

Front panel L, for iPad Air With preparation and fixing material for installing an iPad Air. This module is suitable for type I bottom parts. Protection class with iPad installed max. IP40. We can also offer the option of installing other smaller tablets in our enclosures in this way.

Supply 1 front panel, 2 attachment strips, 1 assembly kits (iPad is not included)

Close

B4146126

Front panel L, for iPad Air
product added to your list
Aluminium
matt anodised
275.4x195.4x4mm
AltText

B4146203

Glass panel L Assembly unit: suitable for bottom part vers. II. Front design without printing. Various media and environmental parameters affect the adhesion of the adhesive foil. Please check before use if it is suitable for your application.

Version Safety glass with anti-reflex coating, high scratch-resistance, very easy to clean

Supply 1 glass panel incl. mounting frame and adhesive foil

Close

B4146203

Glass panel L
product added to your list
Glass
clear
275.6x195.6x17.7mm
AltText

B4146257

Bottom panel with snap-in strips L Assembly unit: suitable for bottom part vers. I and II, screw fixing.

Supply 1 bottom panel, 2 snap-in strips, assembly kit

Close

B4146257

Bottom panel with snap-in strips L
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
AltText

B4146587

Installation assembly kit L, flat For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.

Version Holders matches bottom part, flat

Supply 4 holders, assembly kit, design frame

Close

B4146587

Installation assembly kit L, flat
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
325x251mm
AltText

B4146597

Installation assembly kit L, high For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.

Version Holders matches bottom part, high

Supply 4 holders, assembly kit, design frame

Close

B4146597

Installation assembly kit L, high
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
325x251mm

Accessory "protection"

AltText

B4142005

Sealing S (bottom part - front design) For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).

Supply 1 sealing

Close

B4142005

Sealing S (bottom part - front design)
product added to your list
SEBS (TPE)
AltText

B4142006

Sealing S (bottom part - base/bot. panel/bat. comp...) For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).

Supply 1 sealing

Close

B4142006

Sealing S (bottom part - base/bot. panel/bat. comp...)
product added to your list
SEBS (TPE)
AltText

B4144005

Sealing M (bottom part - front design) For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).

Supply 1 sealing

Close

B4144005

Sealing M (bottom part - front design)
product added to your list
SEBS (TPE)
AltText

B4144006

Sealing M (bottom part - base/bot. panel/bat. comp...) For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).

Supply 1 sealing

Close

B4144006

Sealing M (bottom part - base/bot. panel/bat. comp...)
product added to your list
SEBS (TPE)
AltText

B4146005

Sealing L (bottom part - front design) For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).

Supply 1 sealing

Close

B4146005

Sealing L (bottom part - front design)
product added to your list
SEBS (TPE)
AltText

B4146006

Sealing L (bottom part - base/bot. panel/bat. comp...) For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).

Supply 1 sealing

Close

B4146006

Sealing L (bottom part - base/bot. panel/bat. comp...)
product added to your list
SEBS (TPE)