Accessories for enclosures
Add to my basket Minimum components
1 bottom and top part R110.
1 lid / battery compartment lid / base / base 30° or base 55° (depending on the version of the bottom part and use of battery compartment).
System components to complete
B5010007
Bottom and top part R110 F
Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.
Version Bottom part "level"
Supply 1 top and bottom part R110 F, assembly kit
CloseB5010007
Bottom and top part R110 Fproduct added to your list
off-white RAL 9002
⌀110x30mm
B5010107
Bottom and top part R110 H
Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.
Version Bottom part "level"
Supply 1 top and bottom part R110 H, assembly kit
CloseB5010107
Bottom and top part R110 Hproduct added to your list
off-white RAL 9002
⌀110x38mm
B5010207
Bottom and top part R110 F
Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.
Version Bottom part "inclined"
Supply 1 top and bottom part R110 F, assembly kit
CloseB5010207
Bottom and top part R110 Fproduct added to your list
off-white RAL 9002
⌀110x38mm
B5010307
Bottom and top part R110 H
Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.
Version Bottom part "inclined"
Supply 1 top and bottom part R110 H, assembly kit
CloseB5010307
Bottom and top part R110 Hproduct added to your list
off-white RAL 9002
⌀110x41mm
Accessory "battery"
A9190002
Set of battery clips, 2xN/2xAA/2xAAA
For contacting the batteries.
Note application ART-CASE: only for base suitable (2 x AA).
Note application ART-CASE: only for base suitable (2 x AA).
Supply 1 double contact, 2 single contacts
CloseA9190002
Set of battery clips, 2xN/2xAA/2xAAAproduct added to your list
tin-plated
Accessory "protection"
A9199005
Strain relief
Frame for securing the cable on existing supports. Suitable for cable ø approx. 5-7 mm.
Supply 1 strain relief device, 2 screws
CloseA9199005
Strain reliefproduct added to your list
volcano
B5111707
Anti-rotation device
To prevent the base from being removed.
Supply Anti-rotation device, incl. screws
CloseB5111707
Anti-rotation deviceproduct added to your list
off-white RAL 9002
Accessory "wall/holder"
B5111307
Wall mounting set
Suitable for all versions (except Euro Plug version), for secure wall mounting of the enclosures (machining lid/bases necessary).
Supply Wall mounting set, incl. safety screw
CloseB5111307
Wall mounting setproduct added to your list
off-white RAL 9002
