Search Your location/language U.K., English
B4144587 Installation assembly kit M, flat

B4144587

Installation assembly kit M, flat

For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.

Version

Holders matches bottom part, flat

Supply

4 holders, assembly kit, design frame

  • Components/Accessories
  • View Customising Options

System components to complete

B4044407 Cover M

B4044407

Cover M Assembly unit: suitable for bottom part vers. I. For protecting the electronics. Integrated screw pillars for PCB fixing. Recessed operating area for protecting the membrane keyboard. Fixing from the rear.

Supply 1 cover, assembly kit

Close

B4044407

Cover M
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
225x165x14mm
B4044707 Bottom part M flat, version I

B4044707

Bottom part M flat, version I Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting cover or aluminium front panel (sep. article)

Supply 1 bottom part flat

Close

B4044707

Bottom part M flat, version I
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
225x165x25.5mm
IP 54 opt.
B4044717 Bottom part M flat, version II

B4044717

Bottom part M flat, version II Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part flat

Close

B4044717

Bottom part M flat, version II
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
225x165x25.5mm
IP 54 opt.
B4144106 Front panel M

B4144106

Front panel M Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Close

B4144106

Front panel M
product added to your list
Aluminium
matt anodised
221.5x161.5x2mm
B4144107 Front panel M

B4144107

Front panel M Assembly unit: suitable for bottom part vers. II. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Close

B4144107

Front panel M
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
225.6x165.6x15.5mm
B4144203 Glass panel M

B4144203

Glass panel M Assembly unit: suitable for bottom part vers. II. Front design without printing. Various media and environmental parameters affect the adhesion of the adhesive foil. Please check before use if it is suitable for your application.

Version Safety glass with anti-reflex coating, high scratch-resistance, very easy to clean

Supply 1 glass panel incl. mounting frame and adhesive foil

Close

B4144203

Glass panel M
product added to your list
Glass
clear
225.6x165.6x17.7mm
B4144257 Bottom panel with snap-in strips M

B4144257

Bottom panel with snap-in strips M Assembly unit: suitable for bottom part vers. I and II, screw fixing.

Supply 1 bottom panel, 2 snap-in strips, assembly kit

Close

B4144257

Bottom panel with snap-in strips M
product added to your list
ABS (UL 94 HB)
off-white RAL 9002

Accessory "protection"

B4144005 Sealing M (bottom part - front design)

B4144005

Sealing M (bottom part - front design) For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).

Supply 1 sealing

Close

B4144005

Sealing M (bottom part - front design)
product added to your list
SEBS (TPE)
B4144006 Sealing M (bottom part - base/bot. panel/bat. comp...)

B4144006

Sealing M (bottom part - base/bot. panel/bat. comp...) For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).

Supply 1 sealing

Close

B4144006

Sealing M (bottom part - base/bot. panel/bat. comp...)
product added to your list
SEBS (TPE)

Customising options for B4144587

What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.

  • Technical Data
  • Drawings / Info
  • Purchasing Data
Colour
off-white RAL 9002
Width
272 mm
Height
218 mm
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.

Assembly Instructions (Group)

Drawings (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN EN 16742)

3D-Models (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN EN 16742)

External Accessory - LCD Modules

Miscellaneous information

Weight/1 part
142 g
Customs tariff number
(OKW product)
39269097
Country of manufacture
Germany
trafficflow