Search Your location/language U.K., English
A9250250 Battery spacer

A9250250

Battery spacer

The self-adhesive spacer provides mignon cells with safe support in all battery compartments which can also be used for 9 V flat batteries.
Application: DATEC-MOBIL-BOX S, DATEC-CONTROL XS, HAND-TERMINAL, LUX-CASES 150 and 190, SHELL-TYPE CASES vers. III and IV, HAND-HELD-BOX N.

Supply

1 spacer

  • To be used for
A9046107 HAND-TERMINAL M, Vers. I

A9046107

HAND-TERMINAL M, Vers. I Robust hand-held enclosure. Recessed operation area for membrane keyboards. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version With closed operation area

Supply top and bottom part, battery compartment lid, assembly kit incl. PCB-screws and rubber feet

Close

A9046107

HAND-TERMINAL M, Vers. I
product added to your list
PC+ABS (UL 94 V-0)
off-white RAL 9002
220x120x65mm
IP 65 opt.
A9046109 HAND-TERMINAL M, Vers. I

A9046109

HAND-TERMINAL M, Vers. I Robust hand-held enclosure. Recessed operation area for membrane keyboards. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version With closed operation area

Supply Top and bottom part, battery compartment lid, assembly kit incl. PCB-screws and rubber feet

Close

A9046109

HAND-TERMINAL M, Vers. I
product added to your list
PC+ABS (UL 94 V-0)
black RAL 9005
220x120x65mm
IP 65 opt.
A9046207 HAND-TERMINAL M, Vers. II

A9046207

HAND-TERMINAL M, Vers. II Robust hand-held enclosure. Assembly of the front panels (accessories) from the rear. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version With frame cover for the use of an aluminium-front panel (accessories)

Supply Frame cover, bottom part, battery compartment lid, assembly kit incl. screws for the front panel as well as for the PCB and rubber feet

Close

A9046207

HAND-TERMINAL M, Vers. II
product added to your list
PC+ABS (UL 94 V-0)
off-white RAL 9002
220x120x65mm
IP 65 opt.
A9046209 HAND-TERMINAL M, Vers. II

A9046209

HAND-TERMINAL M, Vers. II Robust hand-held enclosure. Assembly of the front panels (accessories) from the rear. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version With frame cover for the use of an aluminium-front panel (accessories)

Supply Frame cover, bottom part, battery compartment lid, assembly kit incl. screws for the front panel as well as for the PCB and rubber feet

Close

A9046209

HAND-TERMINAL M, Vers. II
product added to your list
PC+ABS (UL 94 V-0)
black RAL 9005
220x120x65mm
IP 65 opt.
A9061017 HAND-HELD-BOX N, Vers. I

A9061017

HAND-HELD-BOX N, Vers. I Large exclusive hand-held case. With recessed area e.g. for membrane keyboards, control elements. Battery compartment accessible from the outside with locked battery compartment lid. For 2 x 9 V flat batteries (PP3) or 4 x 1.5 V mignon cells (AA). Cut-out section for digital and analogical modules. Raised front area to accommodate plugs.

Version With battery compartment

Supply Top and base part, battery compartment lid, assembly kit

Close

A9061017

HAND-HELD-BOX N, Vers. I
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
180x100x44mm
A9061019 HAND-HELD-BOX N, Vers. I

A9061019

HAND-HELD-BOX N, Vers. I Large exclusive hand-held case. With recessed area e.g. for membrane keyboards, control elements. Battery compartment accessible from the outside with locked battery compartment lid. For 2 x 9 V flat batteries (PP3) or 4 x 1.5 V mignon cells (AA). Cut-out section for digital and analogical modules. Raised front area to accommodate plugs.

Version With battery compartment

Supply Top and base part, battery compartment lid, assembly kit

Close

A9061019

HAND-HELD-BOX N, Vers. I
product added to your list
ABS (UL 94 HB)
black RAL 9005
180x100x44mm
A9073107 DATEC-MOBIL-BOX S, Vers. I

A9073107

DATEC-MOBIL-BOX S, Vers. I Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 1.7 mm

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9073107

DATEC-MOBIL-BOX S, Vers. I
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
152x83x33.5mm
IP 65 opt.
A9073109 DATEC-MOBIL-BOX S, Vers. I

A9073109

DATEC-MOBIL-BOX S, Vers. I Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 1.7 mm

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9073109

DATEC-MOBIL-BOX S, Vers. I
product added to your list
ABS (UL 94 HB)
black RAL 9005
152x83x33.5mm
IP 65 opt.
A9073207 DATEC-MOBIL-BOX S, Vers. II

A9073207

DATEC-MOBIL-BOX S, Vers. II Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for 2"-LC-modules with active area 45.8 x 17.8 mm

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9073207

DATEC-MOBIL-BOX S, Vers. II
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
152x83x33.5mm
IP 65 opt.
A9073209 DATEC-MOBIL-BOX S, Vers. II

A9073209

DATEC-MOBIL-BOX S, Vers. II Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for 2"-LC-modules with active area 45.8 x 17.8 mm

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9073209

DATEC-MOBIL-BOX S, Vers. II
product added to your list
ABS (UL 94 HB)
black RAL 9005
152x83x33.5mm
IP 65 opt.
A9073307 DATEC-MOBIL-BOX S, Vers. III

A9073307

DATEC-MOBIL-BOX S, Vers. III Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for miniature-LCDs with 2 lines x 20 characters

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9073307

DATEC-MOBIL-BOX S, Vers. III
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
152x83x33.5mm
IP 65 opt.
A9073309 DATEC-MOBIL-BOX S, Vers. III

A9073309

DATEC-MOBIL-BOX S, Vers. III Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for miniature-LCDs with 2 lines x 20 characters

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9073309

DATEC-MOBIL-BOX S, Vers. III
product added to your list
ABS (UL 94 HB)
black RAL 9005
152x83x33.5mm
IP 65 opt.
A9073407 DATEC-MOBIL-BOX S, Vers. IV

A9073407

DATEC-MOBIL-BOX S, Vers. IV Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for miniature-LCDs with 4 lines x 20 characters

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9073407

DATEC-MOBIL-BOX S, Vers. IV
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
152x83x33.5mm
IP 65 opt.
A9073409 DATEC-MOBIL-BOX S, Vers. IV

A9073409

DATEC-MOBIL-BOX S, Vers. IV Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for miniature-LCDs with 4 lines x 20 characters

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9073409

DATEC-MOBIL-BOX S, Vers. IV
product added to your list
ABS (UL 94 HB)
black RAL 9005
152x83x33.5mm
IP 65 opt.
A9076107 DATEC-CONTROL XS, Vers. I

A9076107

DATEC-CONTROL XS, Vers. I Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Recesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down (battery compartment as accessory).

Version With closed operating area, recess: 1.6 mm deep

Supply Top and base part, battery compartment lid, assembly kit

Close

A9076107

DATEC-CONTROL XS, Vers. I
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
200x94x39.5mm
IP 65 opt.
A9076109 DATEC-CONTROL XS, Vers. I

A9076109

DATEC-CONTROL XS, Vers. I Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Recesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version With closed operating area, recess: 1.6 mm deep

Supply Top and base part, battery compartment lid, assembly kit

Close

A9076109

DATEC-CONTROL XS, Vers. I
product added to your list
ABS (UL 94 HB)
black RAL 9005
200x94x39.5mm
IP 65 opt.
A9076157 SET: DATEC-CONTROL XS, Vers. I,station..

A9076157

SET: DATEC-CONTROL XS, Vers. I,station.. Enclosure-kit: DATEC-CONTROL XS, version I with machining for the locator of the 6-pin contacts and secure connection, 1 base XS, 1 male contact (base) and 1 female contact (enclosure).

Supply Bottom and top part without display cutout, battery compartment lid, base, male contact, female contact, assembly kits

Close

A9076157

SET: DATEC-CONTROL XS, Vers. I,station..
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
200x94mm
IP 65 opt.
A9076159 SET: DATEC-CONTROL XS, Vers. I,station..

A9076159

SET: DATEC-CONTROL XS, Vers. I,station.. Enclosure-kit: DATEC-CONTROL XS, version I with machining for the locator of the 6-pin contacts and secure connection, 1 base XS, 1 male contact (base) and 1 female contact (enclosure).

Supply Bottom and top part without display cutout, battery compartment lid, base, male contact, female contact, assembly kits

Close

A9076159

SET: DATEC-CONTROL XS, Vers. I,station..
product added to your list
ABS (UL 94 HB)
black RAL 9005
200x94mm
IP 65 opt.
A9076207 DATEC-CONTROL XS, Vers. II

A9076207

DATEC-CONTROL XS, Vers. II Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version Top part with maximum sized cutout for display modules

Supply Top and base part, battery compartment lid, assembly kit

Close

A9076207

DATEC-CONTROL XS, Vers. II
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
200x94x39.5mm
IP 65 opt.
A9076209 DATEC-CONTROL XS, Vers. II

A9076209

DATEC-CONTROL XS, Vers. II Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down.(battery compartment as accessory).

Version Top part with maximum sized cutout for display modules

Supply Top and base part, battery compartment lid, assembly kit

Close

A9076209

DATEC-CONTROL XS, Vers. II
product added to your list
ABS (UL 94 HB)
black RAL 9005
200x94x40mm
IP 65 opt.
A9076257 SET: DATEC-CONTROL XS, Vers. II, station.

A9076257

SET: DATEC-CONTROL XS, Vers. II, station. Enclosure-kit: DATEC-CONTROL XS, version II with machining for the locator of the 6-pin contacts and secure connection, 1 base XS, 1 male contact (base) and 1 female contact (enclosure).

Supply Bottom and top part with display cutout, battery compartment lid, base, male contact, female contact, assembly kits

Close

A9076257

SET: DATEC-CONTROL XS, Vers. II, station.
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
200x94mm
IP 65 opt.
A9076259 SET: DATEC-CONTROL XS, Vers. II, station.

A9076259

SET: DATEC-CONTROL XS, Vers. II, station. Enclosure-kit: DATEC-CONTROL XS, version II with machining for the locator of the 6-pin contacts and secure connection, 1 base XS, 1 male contact (base) and 1 female contact (enclosure).

Supply Bottom and top part with display cutout, battery compartment lid, base, male contact, female contact, assembly kits

Close

A9076259

SET: DATEC-CONTROL XS, Vers. II, station.
product added to your list
ABS (UL 94 HB)
black RAL 9005
200x94mm
IP 65 opt.
A9408335 SHELL-TYPE CASES G 155, Vers. IV

A9408335

SHELL-TYPE CASES G 155, Vers. IV Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cells (AA)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408335

SHELL-TYPE CASES G 155, Vers. IV
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
95x158x33mm
A9408336 SHELL-TYPE CASES V 155, Vers. IV

A9408336

SHELL-TYPE CASES V 155, Vers. IV Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cells (AA)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408336

SHELL-TYPE CASES V 155, Vers. IV
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
95x158x33mm
A9408345 SHELL-TYPE CASES G 155, Vers. IV

A9408345

SHELL-TYPE CASES G 155, Vers. IV Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cells (AA)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408345

SHELL-TYPE CASES G 155, Vers. IV
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
95x158x45mm
A9408346 SHELL-TYPE CASES V 155, Vers. IV

A9408346

SHELL-TYPE CASES V 155, Vers. IV Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cells (AA)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408346

SHELL-TYPE CASES V 155, Vers. IV
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
95x158x45mm
A9408355 SHELL-TYPE CASES G 155, Vers. IV

A9408355

SHELL-TYPE CASES G 155, Vers. IV Two-part plastic case with closed front and rear. Top view with recessed area. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cells (AA)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408355

SHELL-TYPE CASES G 155, Vers. IV
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
95x158x33.5mm
A9408638 SHELL-TYPE CASES V 155, Vers. V

A9408638

SHELL-TYPE CASES V 155, Vers. V Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408638

SHELL-TYPE CASES V 155, Vers. V
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
95x158x33mm
A9408648 SHELL-TYPE CASES V 155, Vers. V

A9408648

SHELL-TYPE CASES V 155, Vers. V Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408648

SHELL-TYPE CASES V 155, Vers. V
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
95x158x45mm
A9408737 SHELL-TYPE CASES G 155, Vers. V

A9408737

SHELL-TYPE CASES G 155, Vers. V Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408737

SHELL-TYPE CASES G 155, Vers. V
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
95x158x33mm
A9408747 SHELL-TYPE CASES G 155, Vers. V

A9408747

SHELL-TYPE CASES G 155, Vers. V Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408747

SHELL-TYPE CASES G 155, Vers. V
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
95x158x45mm
A9408757 SHELL-TYPE CASES G 155, Vers. V

A9408757

SHELL-TYPE CASES G 155, Vers. V Two-part plastic case with closed front and rear. Top view with recessed area. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9408757

SHELL-TYPE CASES G 155, Vers. V
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
95x158x33.5mm
A9413638 SHELL-TYPE CASES V 190, Vers. V

A9413638

SHELL-TYPE CASES V 190, Vers. V Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9413638

SHELL-TYPE CASES V 190, Vers. V
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
138x190x45mm
A9413648 SHELL-TYPE CASES V 190, Vers. V

A9413648

SHELL-TYPE CASES V 190, Vers. V Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9413648

SHELL-TYPE CASES V 190, Vers. V
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
138x190x68mm
A9413737 SHELL-TYPE CASES G 190, Vers. V

A9413737

SHELL-TYPE CASES G 190, Vers. V Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9413737

SHELL-TYPE CASES G 190, Vers. V
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
138x190x45mm
A9413747 SHELL-TYPE CASES G 190, Vers. V

A9413747

SHELL-TYPE CASES G 190, Vers. V Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9413747

SHELL-TYPE CASES G 190, Vers. V
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
138x190x68mm
A9413757 SHELL-TYPE CASES G 190, Vers. V

A9413757

SHELL-TYPE CASES G 190, Vers. V Two-part plastic case with closed front and rear. Top view with recessed area. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply 1 top and base part, battery compartment lid, assembly kit

Close

A9413757

SHELL-TYPE CASES G 190, Vers. V
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
138x190x45.5mm
A9912687 LUX CASE 150, Vers. II

A9912687

LUX CASE 150, Vers. II Three-piece case with secure snap-in mechanism.Additional screwing (assembly kit as accessory) possible if required.Fixing towers or card guide (accessory) for PCB assembly.

Version With battery compartment for 4 x 1.5 V mignon cells (AA), accessible from the outside, snap-in place cover

Supply 1 top, center section, base, battery compartment lid, assembly kit

Close

A9912687

LUX CASE 150, Vers. II
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
118x150x57mm
A9915787 LUX CASE 190, Vers. II

A9915787

LUX CASE 190, Vers. II Three-piece case with secure snap-in mechanism. Additional screwing (assembly kit as accessory) possible if required. Fixing towers or card guide (accessory) for PCB assembly.

Version With battery compartment for 4 x 1.5 V mignon cells (AA), accessible from outside, snap-in place cover

Supply 1 top, center section, base, battery compartment lid, assembly kit

Close

A9915787

LUX CASE 190, Vers. II
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
148x190x67mm
  • Technical Data
  • Purchasing Data
Length
50 mm
Width
25 mm
Thickness
4 mm
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.
Weight/1 part
0.5 g
Customs tariff number
(OKW product)
39211900
Country of manufacture
Germany
trafficflow