You can also find us on:

Close
Advanced Search Part-No.
Login / Registration Your location/language U.K., English

bl2601-enclosure-holders-e

HOLDING CLAMPS FOR ROUND RAILS/TUBES

Holding clamps B4308237 (off-white RAL 9002) and B4308238 (lava) are perfect for clipping large handheld enclosures such as CARRYTEC to round tubes from Ø 32 mm and to standard equipment rails manufactured according to DIN EN ISO 19054 (25 x 10 mm). Fitting the clamp requires the drilling of two location holes, Ø 2.4 mm). Each clamp is supplied with two stainless steel Torx T10 screws (Ø 3 x 8 mm).

WHY PA 6 FOR FASTENERS/ADAPTERS

All the fasteners and adapters are moulded from polyamide PA 6, a dependable plastic that has excellent tensile and impact strength, even at low temperatures. This is beneficial for applications where vibration or hard knocks are expected.

PA 6 is resistant to oils, greases, fuels and many organic solvents, making it suitable for industrial or automotive environments. PA 6 also has good heat resistance but it can be vulnerable to moisture absorption.

<< BLG2601-enclosure-din-rail-tube-holders